Sharp FO-IS115N Operation Manual page 49

3
Enter the destination e-mail address using one of the following
methods:
•
Press
SCAN TO E-MAIL
keys (p. 13). When finished, press
•
If the address has been stored in a Rapid Key, press the Rapid Key.
•
If the address has been stored in a Speed Dial number, press
enter the Speed Dial number.
•
To search for a stored address, press
stored fax numbers from the search), press
address appears, and press
Note: If [CHECK E-MAIL SETTING] appears, your SMTP server or sender
address has not been entered in the e-mail settings (p. 34).
4
If you need to select or change any of the e-mail options, press
go to Step 5 below. (Note that settings selected here are temporary. To
make permanent changes, see p. 34.)
If you do not wish to change the e-mail options, go directly to Step 7.
5
Press or
( is not necessary for the FILE FORMAT setting). Change the option
as explained below (use the letter keys to enter text and
text; p. 13).
•
E-MAIL SUBJECT: Enter a subject (max. 128 characters). When finished,
START
press .
•
E-MAIL MESSAGE: Enter a message (max. 256 characters). When
finished, press
Scan to E-mail Transmission
, and enter the address with the letter and number
START
START
.
until the desired option appears, and press
START
.
.
(this eliminates
SCAN TO E-MAIL
or until the name or
DEL
SPEED DIAL
and
and
to delete
45