Sharp FO-IS115N Operation Manual page 135

Being polled (Memory polling)
To let another fax machine poll your machine, you must first scan the
document into memory using the following procedure. Transmission will take
place when the other fax machine calls your machine and activates polling.
You can choose whether to allow polling only once, or an unlimited number of
times.
♦
If you allow polling only once, the document will be automatically cleared
from memory after polling. If you allow polling an unlimited number of times,
the document will remain in memory until you clear it as explained on page
132.
1
Load the document.
•
If desired, press
FUNCTION
2
Press
3
Press .
4
Press to select SET.
Display: [1=ONCE, 2=REPEAT]
5
Press to allow polling only once, or
unlimited number of times.
6
START
Press .
•
The document is scanned into memory.
7
Set the reception mode to AUTO (press
the display).
RESOLUTION
to set the resolution and/or contrast.
, then until [MEMORY POLLED] appears.
Polling (Requesting a Fax)
to allow polling an
RECEPTION
until "AUTO" appears in
131