Sharp FO-IS115N Operation Manual page 85

Using the operation panel to store users
Follow the steps below to store users using the machine's operation panel.
♦
When the operation panel is used to store a user, the operations that the
user is permitted to use are fixed at copying, faxing, and scanning. If you
wish to permit the user to configure the FUNCTION key settings, store or
edit the user using the Web page.
1
Press
•
If the display shows [ENTER PASSWORD] after you press
SECURE
2
Press , then
3
Press twice.
4
Enter the name of the user (maximum of 20 characters).
•
This name is only used for user management; it is not used to log in.
5
START
Press .
6
If user number has been selected as the authentication method, press
the number keys to enter the user number that you wish to assign to the
user (any number from 5 to 8 digits not already in use).
If login name and password has been selected as the authentication
method, enter the login name that the user will use to log in (maximum
of 32 characters). Press
use (maximum of 30 characters).
, then
SECURE
, enter the administrator code and press
until [USER REGISTRATION] appears.
START
and enter the password that the user will
User Authentication
until [USER CONTROL] appears.
START
.
81