Sharp FO-IS115N Operation Manual page 101

Using the operation panel to activate Authorised
Transmission
Follow the steps below to activate (or deactivate) the Authorised Transmission
function using the operation panel.
♦
At least one supervisor must be stored before Authorised Transmission can
be activated.
1
Press
appears.
•
If the display shows [ENTER PASSWORD] after you press
SECURE
2
Press .
Display: [ACTIVATE AUTH. TX]
3
Press (ON) to activate the function, or
function.
•
If [SETUP APPROVER] appears, you must first store a supervisor as
expained on page 92.
STOP
4
Press
, then
SECURE
, enter the administrator code and press
to exit.
Authorised Transmission
until [AUTH. TRANSMISSION]
(OFF) to deactivate the
START
.
97