Copying Problems - Sharp FO-IS115N Operation Manual

No reception occurs when
polling is attempted.

Copying problems

Problem
The quality of copies is
poor and/or dark vertical
lines appear.
The paper comes out
blank when you make a
copy.
The size of the printed
document image does not
match the size of the
paper.
A copy is faint.
• Make sure the transmitting machine is in automatic
reception mode.
• If the transmitting machine has polling security, make
sure that your fax number has been entered both in
your machine (see page 26) and in the transmitting
machine.
• Any dirt or material on the scanning glass will cause
spots to appear on copies and transmitted faxes.
Clean the scanning glass as explained on page 146.
• Make sure the original is placed face down in the
feeder.
• Make sure an appropriate enlarge/reduce setting is
selected (see page 112).
• Adjust the contrast setting (see page 58).
• If other printed output is also faint, the toner cartridge
may need replacement (see page 150).
Problems and Solutions
Solution
159