Send Hold Function (Fax Only) - Sharp FO-IS115N Operation Manual

Send Hold Function (Fax Only)

To ensure that a fax is not accidentally sent to the wrong fax number when
you use automatic dialing, this function displays the fax number (or the name
stored for the fax number) that you entered and prompts you to confirm that it
is correct. After you check the number, press
transmission.
♦
Send Hold will not operate if the handset is lifted or
before dialing.
Activating (or deactivating) the Send Hold function
1
Press
•
If the display shows [ENTER PASSWORD] after you press
SECURE
2
Press .
Display: [ACT. SEND HOLDING]
3
Press (ON) to activate Send Hold.
(Press
STOP
4
Press
, then
SECURE
, enter the administrator code and press
(OFF) to deactivate Send Hold.)
to exit.
Send Hold Function (Fax Only)
START
to begin dialing and
SPEAKER
until [SEND HOLDING] appears.
is pressed
START
.
103