Sharp FO-IS115N Operation Manual page 21

♦
The power outlet must be installed near the equipment and must be easily
accessible.
♦
The machine does not have a power on/off switch. The power is turned on
and off by simply plugging in or unplugging the power cord.
♦
Whenever you unplug the power cord, wait at least 5 seconds before
plugging it back in.
♦
If your area experiences a high incidence of lightning or power surges, it is
recommended that you install surge protectors for the power and telephone
lines. Surge protectors can be purchased from your dealer or at most
telephone specialty stores.
♦
Do not plug the power cord into any other kind of outlet. This will damage
the machine.
♦
When disconnecting the machine, always disconnect the phone line before
you disconnect the power cord. When re-connecting the machine, always
connect the power cord before connecting the phone line.
Basic Setup
17