Using Manual Mode - Sharp FO-IS115N Operation Manual

Using MANUAL Mode

Using MANUAL Mode
To select MANUAL mode, press
display.
In MANUAL mode, you must answer all calls (even faxes) by picking up the
machine's handset.
Answering on the machine's handset
Important: If a document is loaded in the machine's feeder, remove it before
performing the steps below.
1
When the machine rings, pick up the handset.
2
If you hear a soft fax tone, wait until the display shows [RECEIVING] and
then replace the handset.
♦
If [RECEIVING] does not appear (or if you have set the Fax Signal Receive
setting to NO (pp. 139, 140)), press
3
If the other party first speaks with you and then wants to send a fax,
START
press
key.)
•
When [RECEIVING] appears in the display, hang up.
72
after speaking. (Press before the sender presses their Start
RECEPTION
until [MANU] appears in the
START
to begin reception.