Conversion Kit #521-969 From Ng To Lp - Regency LIBERTY L676-NG Owners & Installation Manual

INSTALLATION

CONVERSION KIT #521-969 FROM NG TO LP

LP Conversion instructions for BEFORE UNIT INSTALLATION.
THIS CONVERSION MUST BE DONE BY A QUALIFIED GAS FITTER, IF IN DOUBT DO NOT DO THIS CONVERSION!!
LP Conversion Kit Contains:
Qty. Part # Description
1 910-462 LP Conversion Coil
1 904-573 Cable Tie
1 910-037 LP Pilot Orifi ce
1 904-345 Orifi ce #53 (back)
1 904-241 Orifi ce #56 (front)
1 904-529 Allen Key
1 918-590 LP Conversion Decal
1 908-528 Red Propane Label
1 918-596 Instruction Sheet
1) Remove the glass door.
a. Release the 2 door latches on the left
and right side at the top of the fi rebox.
Latch Location
Latch
28
b. Swing the door out from the top and
release the hinges on the left and right
side of the door by lifting them up.
Door
c. Place the door on a soft surface to prevent
scratching.
2) Remove the grate by undoing the 2 screws
on the right and left side.
Grate
3) Remove the front burner by removing the
screw.
Front Burner
Hinge
Front Burner Removed
4) Remove the back burner by removing the
screw.
5) Remove the rear log stand by removing
the 4 screws.
Rear Log Stand
Regency ® L676 Direct Vent Gas Fireplace
Back Burner