Assembly
It is important
for your safety and to get
accurate cuts that you put the saw
together according to these instructions.
Identifying
Parts
The following parts are included:
Note: Before beginning
assembly,
check
that all parts are included.
If you are miss-
ing any part do not assemble saw. Con-
tact your Sears Service Center or Retail
Store and get the missing part. Sometimes
small parts can get lost in packaging
material
Do not throw away any packag-
ing until saw is put together.
Check pack-
aging for missing parts before contacting
Sears. A complete parts list (Repair
Parts) is at the end of the manual.
Use
the list to identify the number
of the miss-
ing part.
A. Radial Arm ................................. 1
B. Blade Carriage ............................ 1
C. Base .............................................. 1
D. Side Frame .................................. 2
E. Table Support ............................. 2
F. Front Stiffener ............................. 1
G. Rear Table .................................. 1
H. Spacer Table ................. .............. 1
I. Rip Fence ...................................... 1
J. Front Table ................................... 1
K_Dust Elbow .................................. 1
12