Adjusting In-Rip Scale Indicator - Craftsman 113.234700 Owner's Manual

Alignment and Adjustment
spreader does not rest flat against
fence, go to step 6.
6. Use v_"wrench to loosen both
spreader nuts. Slide spreader against
fence. Tighten spreader nuts.
7. Unlock pawls/spreader lock, raise
paw!/spreader unit up to guard and lock
in place. Leave saw in this position to
adjust in-rip scale indicator.
Spreader_
Adjusting In-Rip Scale Indicator
1. With saw in in-rip position and blade
against fence, align in-rip scale indicator
with O.
37