Rolling Carriage; Thrown Chips - Craftsman 113.234700 Owner's Manual

Crosscutting
Rolling Carriage
_WARNING:
When saw is turned on, blade can
suddenly come toward you. To
reduce risk of this happening:
1. Keep one hand on saw handle when
turning saw on.
2. Make sure saw slants slightly toward
rear. If needed, put shim under front
frame.
3. Whenever saw is moved, check to be
sure that it is slightly lower in rear.
Thrown Chips
_WARNING:
The saw can violently throw
workplece chips. Pieces of blade
can break off and be thrown violent-
ly. To reduce risk of eye Injury and
blindness:
1.Wear safety goggles labeled "ANSI
Z87.1" on package. Regular eyeglasses
are not safety goggles.
2. Check blades for damage.
3. Keep saw table clean and clear of all
objects except workpiece to be cut and
necessary fixtures or clamps.
kWARNING
41