Setting E-Mail Subject - Kyocera TASKalfa 300i Operation Manual

Report - Auto Sending
Send job log history to the specified destination after a set number of jobs
have been logged.
Jobs
Off
On
Status
Manual Job Log History Transmission
You can also send the job log history to the specified destinations manually.
Use the procedure below to send the job log history manually.

Setting E-mail Subject

Set the subject automatically entered when sending job log histories by e-mail.
Use the procedure below to set the subject.
(1 - 1500)
100
Cancel OK
08/08/2009 10:10
3
Press [On] and enter the number of jobs in the job
log history print by using [+]/[-] or the numeric keys.
You can enter any number between 1 and 1500.
4
Press [OK].
1
Press the System Menu key.
2
Press [Report], [Next] of Sending Job Log History
and then [Execute] of Send Job Log History.
When the confirmation screen appears, press
[Yes]. The job log history is sent.
1
Press the System Menu key.
2
Press [Report], [Next] of Sending Job Log History
and then [Change] of Subject.
3
Enter an e-mail subject not more than 60
characters.
NOTE:
Refer to the Character Entry Method on
Appendix-10 for details on entering characters.
4
Check that the entry is correct and press [OK].
7-12
Status / Job Cancel