Kyocera TASKalfa 300i Operation Manual page 248

300i operation guide
Hide thumbs Also See for TASKalfa 300i:
Table of Contents

Advertisement

Item
Text
for OCR
Printed Document
*
This function is only available for black and white mode.
Use the procedure below to select the default quality setting for originals.
1
Press the System Menu key.
2
Press [Common Settings], [
3
Select the default original image.
4
Press [OK].
Scan Resolution
Select the default scanning resolution. The options are 600x600dpi, 400x400dpi Ultra Fine, 300x300dpi,
200x400dpi Super Fine, 200x200dpi Fine, 200x100dpi Normal.
Use the procedure below to select the default resolution setting.
1
Press the System Menu key.
2
Press [Common Settings], [
3
Select the default resolution.
4
Press [OK].
Color Selection
Select the default color mode for scanning documents. The available default settings are shown below.
Color mode
Auto Color (Color/Gray)
Auto Color (Color/B & W)
Full Color
Grayscale
Black & White
Use the procedure below to select the default color mode.
1
Press the System Menu key.
Only text, no photos.
Image quality suitable for OCR software.*
For documents printed from this machine.
], [Next] of Function Defaults and then [Change] of Original Image.
], [Next] of Function Defaults and then [Change] of Scan Resolution.
Automatically recognize whether the document is color or black
and white, and scan color documents in Full Color and black and
white documents in Grayscale.
Automatically recognize whether the document is color or black
and white, and scan color documents in Full Color and black and
white documents in Black and White.
Scan document in full color.
Scan document in grayscale for smoother and finer finish.
Scan document in black and white. File size is smaller than Full
Color or Grayscale.
8-16
Default Setting (System Menu)
Description
Description

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

300i

Table of Contents