Page Numbering - Kyocera TASKalfa 300i Operation Manual

Page Numbering

Number multiple pages of originals in sequential order. The formats for numbering are [-1-], [P.1] or [1/n]. The
format [1/n] prints the total number of pages in the place of n.
Select Top Left, Top Middle, Top Right, Bottom Left, Bottom Middle or Bottom Right as the page numbering
position.
Use the procedure below to insert page numbers on your copies.
Ready to copy.
Page #
Off Position
Top Top
Left Middle
-1-
Bottom Bottom
Left Middle
P.1
1st Page (1 - 10)
1
1/n
# Keys
Status
Original
Copies
Auto
Top
Last Page
Right
Bottom
Right Auto
Denominator
Start #
(1 - 999)
#
1
Top Edge Top
Original
Orientation
# Keys
Cancel OK
08/08/2009 10:10
[ – 1 –] [P.1]
1
Press the Copy key.
2
Place the originals in the document processor or on
the platen.
3
Press [Layout/Edit] and then [Page #].
4
Select the numbering format from [-1-], [P.1] or
[1/n].
5
Select the page numbering position.
6
To start page numbering from a page other than the
first page, press [+] or [–] of 1st Page and select the
starting page. You can also enter the number with
the numeric keys after pressing [# Keys].
7
To start the numbering with a number other than 1,
press [+] or [–] of Start Number and enter the
starting number. You can also enter the number
with the numeric keys after pressing [# Keys].
8
If you do not want page numbering through to the
last page, press [Last Page]. Select Manual and
use [+] or [-] to enter the final page to be numbered
(a negative number of pages counting backwards
from the last page). Then press [OK]. You can set a
value up to -10. You can also enter the number with
the numeric keys after pressing [# Keys].
4-23
Copying Functions
4
[1/n]