Kyocera TASKalfa 300i Operation Manual page 245

Paper Mismatch Error
Select what to do when the selected paper size or type does not match paper size or type loaded in the specified
paper source while printing from the computer by specifying the cassette or multi-purpose tray.
Processing
Ignore
Display Error
Use the procedure below to specify the settings for error handling.
1
Press the System Menu key.
2
Press [Common Settings] and then [Next] of Error Handling.
3
Press [Change] at the error you wish to change the handling.
4
Select the error handling method in the selection screen for each of the errors and then press [OK].
5
The previous screen appears. To set the handling for a different error, repeat steps 3 and 4.
Paper Output
Select output tray respectively for copy jobs, print jobs from Custom Box, computers, and FAX RX data. The
options are as follows.
Output Tray
Top Tray
Finisher Tray*
Job Separator
* Select [Face Up] (print surface up) or [Face Down] (print surface down) for paper orientation at output.
NOTE:
The optional job separator, built-in finisher, or document finisher are required.
FAX RX data output can be specified when the optional fax kit is installed.
Use the procedure below to select the output tray.
1
Press the System Menu key.
2
Press [Common Settings] and then [Next] of Paper Output.
3
Press [Change] of Copy/Custom Box, Printer, or FAX Port 1 or FAX Port 2.
NOTE:
FAX Port 1 appears when the optional fax kit is installed. If you have 2 optional fax kits installed, Fax
Port 2 appears. You can specify the output tray for the second kit (Dual FAX).
The setting is ignored and the job is printed.
Error message to cancel printing is displayed.
Delivery on Top Tray of the machine.
Delivery on Tray set to the optional built-in finisher or document finisher.
Delivery on the optional job separator.
8-13
Default Setting (System Menu)
Description
Descriptions
8