Kyocera TASKalfa 300i Operation Manual page 249

2
Press [Common Settings], [
3
Select the default color mode.
4
Press [OK].
File Format
Select the default file type to send the scanned originals. The available default settings are shown below.
Item
PDF
TIFF
JPEG
XPS
High Comp. PDF
NOTE:
Refer to page 5-12 for file formats.
Use the procedure below to select the default file format.
1
Press the System Menu key.
2
Press [Common Settings], [
3
Select the default file format.
4
Press [OK].
File Separation
Select the default file separation setting. The available default settings are shown below.
Item
Off
Each Page
NOTE:
Refer to page 5-13 for file separation.
Use the procedure below to select the default file separation.
1
Press the System Menu key.
2
Press [Common Settings], [
3
Select the default for [Off] or [Each Page].
Press [OK].
], [Next] of Function Defaults and then [Change] of Color Selection.
Send files in PDF format.
Send files in TIFF format.
Send files in JPEG format.
Send files in XPS format.
Send files in High Comp. PDF format (refer to page 5-14).
], [Next] of Function Defaults and then [Change] of File Format.
No file separation performed (all the pages are compiled in one file).
Each scanned page is created into a separate file.
], [Next] of Function Defaults and then [Change] of File Separation.
8-17
Default Setting (System Menu)
Description
Description
8