Kyocera TASKalfa 300i Operation Manual page 128

Use the procedure below to select the paper size and media type.
Ready to copy.
Paper Selection - MP Tray Setting
Ledger Letter
Standard
Sizes 1
Legal Statement
Standard
Sizes 2
8.5x13.5" OficioII
Others
Size Entry
Status
Ready to copy.
Original Size
X (5.83 - 17.00)
Standard
Sizes 1
Standard
Sizes 2
# Keys
Others
Y (3.86 - 11.69)
Size Entry
# Keys
Status
Copies
Letter
Executive
Plain
Media Type
Cancel OK
08/08/2009
Copies
"
17
"
11
Plain
Media Type
Cancel OK
08/08/2009
1
Press the Copy key.
2
Place the originals on the platen.
3
Press [Org./Paper/Finishing], [Paper Selection]
and then [MP Tray Setting].
4
Press [Standard Sizes 1 ], [Standard Sizes 2 ],
[Others] or [Size Entry] to select the paper size.
10:10
If you select [Size Entry], press [+] or [–] to specify
X (horizontal) and Y (vertical) sizes. You can enter
the size directly using the numeric keys after
pressing [# Keys].
5
Press [Media Type].
10:10
6
Select paper type, and press [OK].
7
Press [OK].
8
Press [OK].
9
Press the Start key to start scanning the originals.
10
When the machine is ready, the confirmation
screen for the specified paper appears. Load the
required paper in the multi purpose tray and press
[Continue] to start copying.
4-6
Copying Functions