Setting Date And Time - Kyocera TASKalfa 250ci Operation Manual

Preparation before Use

Setting Date and Time

Follow the steps below to set the local date and time at the place of installation.
When you send an E-mail using the transmission function, the date and time as set here will be printed in the
header of the E-mail message. Set the date, time and time difference from GMT of the region where the machine
is used.
NOTE:
Be sure to set the time difference before setting the date and time.
Date/Timer - Time Zone
Set time zone.
Select the location nearest you.
Time Zone
-12:00 International Date Line West
-11:00 Midway Island, Samoa
-10:00 Hawaii
-09:00 Alaska
-08:00 Pacific Time (US & Canada)
-07:00 Arizona
Status
2-8
Summer Time
1/13
Off
On
Cancel OK
10/10/2008 10:10
1
Turn on the main power switch.
2
Press the System Menu key.
3
Press [ ], [Date/Timer] and then [Change] of
Time Zone.
4
Select the region.
NOTE:
Press [ ] or [
5
Press [Off] or [On] of Summer Time and press [OK].
NOTE:
If you select a region that does not utilize
summer time, the summer time setting screen will not
appear.
6
Press [Change] of Date/Time.
] to view the next region.
OPERATION GUIDE