Sending Size Selection - Kyocera TASKalfa 250ci Operation Manual

Sending Functions

Sending Size Selection

Select the sending size (the size of image to be sent).
The table below lists the sizes.
Standard
Sizes 1
Standard
Sizes 2
Others
Relationship between Original Size, Sending Size, and Zoom
Original Size (page 5-2), Sending Size, and Zoom (page 5-6) are related to each other. Refer to the following
table.
Original Size and the size you
Original Size
Sending Size
Zoom
NOTE:
When you select Sending Size that is different from Original Size, and select the Zoom [100%], you
can send the image as the actual size (No Zoom).
Use the procedure below to select the size for transmission when sending scanned images.
5-4
Item Detail
Select from Same
as Original Size or
Standard Size.
Select from
standard size
except Standard
Sizes 1.
Select from
Hagaki.
wish to send as are
Size
Inch models: Same as Original Size,
Ledger, Legal, Letter, Statement,
8.5×13.5", Oficio II, 11×15"
Metric models: Same as Original Size,
A3, B4, A4, B5, A5, B6, A6, Folio
Inch models: A3, B4, A4, B5, A5,
B6, A6, Folio, 8K, 16K
Metric models: Ledger, Legal,
Letter, Statement, 8.5×13.5",
Oficio II, 11×15", 8K, 16K
Hagaki, Oufuku Hagaki
the same
Specify as Specify as
necessary necessary
Select [Same as Select the
Original] required size
Select [100%] Select [Auto]
(or [Auto])
1
Press the Send Key.
2
Place the originals on the platen.
3
Press [Original/Sending Data Format] and then
[Sending Size].
different
OPERATION GUIDE