Kyocera TASKalfa 250ci Operation Manual page 394

Troubleshooting
Error
Code
1105 Failed to send via SMB.
Failed to send the e-mail.
Failed to send via FTP.
Failed to send i-FAX.
1106 Failed to send the e-mail.
Failed to send i-FAX.
1131 Failed to send via FTP.
1132 Failed to send via FTP.
2101 Failed to send via SMB.
Failed to send via FTP.
Failed to send the e-mail.
Failed to send i-FAX.
2102 Failed to send via FTP.
Failed to send the e-mail.
Failed to send i-FAX.
10-12
Error Message Corrective Actions
Select [On] of the SMB settings on
the COMMAND CENTER.
Select [On] of the SMTP settings on
the COMMAND CENTER.
Select [On] of the FTP settings on the
COMMAND CENTER.
Select [On] of the i-FAX settings on
the COMMAND CENTER.
Check the sender address of SMTP
on the COMMAND CENTER.
Select [On] of the secure protocol
settings on the COMMAND
CENTER.
Check the followings of the FTP
server.
- Is FTPS available?
- Is the encryption available?
Check the network and SMB settings.
Check the network and FTP settings.
- The network cable is connected.
- The hub is not operating properly.
- The server is not operating properly.
- Host name and IP address
- Port number
Check the network and COMMAND
CENTER.
- The network cable is connected.
- The hub is not operating properly.
- POP3 server name of the POP3
user
- SMTP server name
Check the followings of the FTP
server.
- Is FTP available?
- The server is not operating properly.
Check the network.
- The network cable is connected.
- The hub is not operating properly.
- The server is not operating properly.
Reference Page
2-14
FAX System (Q)
Operation Guide
Chapter 8
"Internet Faxing
(i-FAX) (Option)"
2-14
2-14
2-14
2-14
–
OPERATION GUIDE