Kyocera TASKalfa 250ci Operation Manual page 150

Copying Functions
Ready to copy.
Combine
Off
2 in 1
Place original.
4 in 1
Original : ---
Zoom :
100%
Paper : ---
Preview
Add Shortcut
Status
4-24
Copies
Layout
Left then
Right then
Down Down
None
Border Line
Top Edge Top
Down then Down then
Right Left
Original
Orientation
Cancel OK
10/10/2008
3
Press [Layout/Edit] and then [Combine].
4
Press [2 in 1] or [4 in 1], and choose the page layout
of Layout.
10:10
5
Press [Border Line] to choose the type of the lines
to indicate page boundaries. Press [OK].
6
Press [Original Orientation] to choose orientation of
the originals, either [Top Edge Top] or [Top Edge
Left]. Then press [OK].
7
Press [OK].
8
Press the Start key. Copying begins.
If the original is placed on the platen, replace the
original and press the Start key.
After scanning all originals, press [Finish Scan] to
start copying.
OPERATION GUIDE