Sending Functions
File Format
Select the file format of the image to send.
The table below lists the file formats and their details.
File Format
PDF
TIFF
JPEG
XPS
High Comp.
PDF
NOTE:
In the color mode, when auto color (color/black and white) is selected, [JPEG] and [XPS] cannot be
specified, and when black and white is selected, [JPEG], [High Comp. PDF], and [XPS] cannot be specified.
When [High Comp. PDF] is specified, you cannot adjust the image quality. In addition, when previewing the color
of the image by selecting [High Comp. PDF], it may differ from the actual color.
You can use PDF encryption functions. For details, refer to the following PDF Encryption Functions.
Use the procedure below to select the file format for transmission.
5-14
Adjustable range of image
quality
1 Low Quality (High Comp.) to
5 High Quality (Low Comp.)
1 Low Quality (High Comp.) to
5 High Quality (Low Comp.)
1 Low Quality (High Comp.) to
5 High Quality (Low Comp.)
1 Low Quality (High Comp.) to
5 High Quality (Low Comp.)
1 Compression Ratio Priority
to 3 Quality Priority
Color mode
Auto Color (Color/Grayscale),
Auto Color (Color/Black and
White), Full Color, Grayscale,
Black and White
Auto Color (Color/Grayscale),
Auto Color (Color/Black and
White), Full Color, Grayscale,
Black and White
Auto Color (Color/Grayscale),
Full Color, Grayscale
Auto Color (Color/Grayscale),
Full Color, Grayscale
Auto Color (Color/Grayscale),
Auto Color (Color/Black and
White), Full Color, Grayscale
1
Press the Send key.
2
Place the originals on the platen.
3
Press [Original/Sending Data Format] and then
[File Format].
4
Select the file format from [PDF], [TIFF], [JPEG],
[XPS], and [High Comp. PDF].
OPERATION GUIDE