Kyocera TASKalfa 250ci Operation Manual page 367

Limitations:
- Scanning speed will be limited to the speed of scanning 600 dpi image. (Printing speed will not
be limited.)
- FAX transmission will be limited to the memory transmission.
Note:
- The Printed Document Guard Kit should not fully prevents a leak of information. We do not
guarantee any loss incurred while using this feature or when malfunction occurred with this
feature.
- The guard pattern printed on the colored paper or paper that is decorated with special design
may not be detected.
- We do not guarantee the integrity of the detection. If the malfunction occurs, contact your service
representative.
Use the procedure below to specify the Document Guard setting.
OPERATION GUIDE
Default Setting (System Menu)
1
Press the System Menu key.
2
Press [System] and then [Next] of Optional
Function.
NOTE:
If user login administration is disabled, the
user authentication screen appears. Enter your login
user name and password and then press [Login]. For
this, you need to login with administrator privileges.
Refer to Adding a User on page 11-4 for the default
login user name and password.
3
Select [Document Guard] from the list and then
[License On].
4
Enter the license key and press [Official]. To use
the function as a trial, press [Trial] without entering
the license key.
NOTE:
For details on how to enter the license key,
consult your dealer or service representative.
8
8-103