Kyocera TASKalfa 250ci Operation Manual page 132

Copying Functions
*
**
***
NOTE:
You can conveniently select in advance the size and type of paper that will be used often and set them
as default (refer to Paper Size and Media Type Setup for Multi Purpose Tray on page 8-8).
Use the procedure below to select the paper size and media type.
Ready to copy.
Paper Selection - MP Tray Setting
Ledger Letter
Standard
Sizes 1
Legal Statement
Standard
Sizes 2
8.5x13.5" OficioII
Others
Size Entry
Status
Ready to copy.
Original Size
X (5.83 - 17.00)
Standard
Sizes 1
Standard
Sizes 2
# Keys
Others
Y (3.86 - 11.69)
Size Entry
# Keys
Status
4-6
For instructions on how to specify the custom paper sizes (Custom 1
to 4), refer to Adding a Custom Size and Media Type for Paper to
Print on page 8-6.
The input units can be changed in the System menu.
Refer to Switching Unit of Measurement on page 8-15.
For instructions on how to specify the custom paper types 1 to 8,
refer to Paper Weight on page 8-9.
To print on preprinted or prepunched paper or on letterhead, refer to
Special Paper Action on page 8-14.
Copies
Letter
Executive
Plain
Media Type
Cancel OK
10/10/2008
Copies
"
17
"
11
Plain
Media Type
Cancel OK
10/10/2008
1
Press the Copy key.
2
Place the originals on the platen.
3
Press [Org./Paper/Finishing], [Paper Selection]
and then [MP Tray Setting].
4
Press [Standard Sizes 1 ], [Standard Sizes 2 ],
[Others] or [Size Entry] to select the paper size.
10:10
If you select [Size Entry], press [+] or
[–] to specify X (horizontal) and Y (vertical) sizes.
You can enter the size directly using the numeric
keys after pressing [# Keys].
10:10
5
Press [Media Type].
6
Press [Media Type] to select paper type, and press
[OK].
7
Press [OK].
OPERATION GUIDE