Interrupt Copy - Kyocera TASKalfa 250ci Operation Manual

Basic Operation

Interrupt Copy

This function allows you to pause the current jobs in progress when you need to make copies immediately.
When interruption copy ends, the machine resumes the paused print jobs.
NOTE:
If the machine is left unused for 60 seconds in interrupt copy mode, interrupt copying is automatically
cancelled and printing resumes. You can change the delay until interrupt copying is cancelled. Change the
delay as required. For more information, refer to Interrupt Clear Timer on page 8-70.
Ready for interrupt copy.
Copy Image
Place original.
Auto
Paper
Original : ---
Selection
Zoom : 100%
2-sided
---
Paper :
>>2-sided
Preview Duplex
Quick Setup Org./Paper/
Finishing
Status
3-24
Copies
Shortcut 1
Shortcut 2
Shortcut 3
100% Normal 0
Shortcut 4
Zoom Density
Shortcut 5
2 in 1 Off
Shortcut 6
Combine Staple/Punch
Color/ Layout/Edit Advanced
Image Quality Setup
10/10/2008
1
Press the Interrupt key.
1
Ready for interrupt copy. is displayed.
The current print job is temporarily interrupted.
10:10
2
Place the originals onto the machine for interrupt
copy, and configure the copy settings.
3
Press the Start key to start interrupt copying.
4
When interrupt copying ends, press the Interrupt
key.
The machine resumes the paused print jobs.
OPERATION GUIDE