Automatically Saving Received Messages To The Hard Disk - Furuno FELCOM 16 Operator's Manual

4.2.6

Automatically saving received messages to the hard disk

You may automatically save received messages other than confidential or
password-affixed messages to the hard disk as follows:
1. Press the [F8] key.
2. Press the [5] key to display the Auto Mode Setup menu.
3. Press the [↑] or [↓] key to choose Auto Receive Message Save.
4. Press the [Enter] key to open the auto receive message save options
window.
5. Press the [↑] key to choose ON.
6. Press the [Enter] key to close the window.
7. Press the [Esc] key twice.
Note: To designate directory where to store receive messages, see paragraph
2.9.2.
Auto Mode Setup
Auto Log Print
Receive Alarm
Auto Receive Message Save
Auto Receive Message Print
Data Report & Polling Print
Auto EGC Message Save
Auto EGC Message Print
Auto mode setup menu
4. INMARSAT C OPERATIONS
OFF
OFF
OFF
OFF
OFF
4-29