Saving Data To Memory Cards - Furuno GD-3300 Operator's Manual

9.2 Saving Data to Memory Cards

9-2
4. Press the [8] key to select FORMAT MEMORY CARD.
5. Press the [ENT] key.
"FORMATTING" appears on the display during formatting. "FOR-
MATTING COMPLETED" appears upon completion of formatting.
If the card could not be formatted, "FORMATTING FAILED" ap-
pears.
You may save data (track, marks, lines and waypoints, routes) to a
memory (RAM) card for storage and later replay. Two types of
memory cards are available: 256KB and 512KB.
1. Open the card drive door and place a formatted memory card in
the upper card slot.
2. Press the [MENU] key.
3. Press the [3] key to select SAVE DATA TO MEMORY CARD.
3 SAVE DATA TO M.C.
1 TRACK
2 MARK/LINE
3 WAYPOINT/ROUTE
4 INITIAL SETTINGS
5
6
7 DELETE MEMORY CARD DATA
8 FORMAT MEMORY CARD
9 SELECT CARD SLOT
SELECT ITEM TO SAVE
BY USING NUMBER KEY.
Figure 9-3 SAVE DATA TO M.C. menu
4. Select the item you want to save by pressing appropriate numeric
key: [1], track; [2], marks (including lines), [3], waypoints (in-
cluding routes). Then, the menu related to the item selected for
saving appears. Figure 9-4 shows the SAVE TRACK display.