Saving, Printing Egc Messages Automatically - Furuno FELCOM 16 Operator's Manual

2.4.4

Saving, printing EGC messages automatically

You may choose the EGC messages to save and print as follows:
Automatically saving EGC messages
1. Press the [F8] key to display the Setup menu.
2. Press the [5] key to display the Auto Mode Setup menu.
3. Press the [↓] or [↑] key to choose Auto EGC Message Save and then press
the [Enter] key.
4. Press the [↓] or [↑] key to choose message type and then press the [Enter]
key.
5. Choose ON or OFF as appropriate and press the [Enter] key to close the
window.
6. Press the [Esc] key three times to return to the standby display.
Auto Mode Setup
Auto Log Print
Receive Alarm
Auto Receive Message Save
Auto Receive Message Print
Data Report & Polling Print
Auto EGC Message Save
Auto EGC Message Print
Auto EGC message save menu
Auto Mode Setup
Auto EGC Message Save
System
FleetNET
SafetyNET (Routine)
SafetyNET (Safety)
SafetyNET (Urgent & Distress) ON
Auto EGC message print menu
2. SYSTEM INITIALIZATION
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
2-15