Furuno FELCOM 16 Operator's Manual page 46

2. SYSTEM INITIALIZATION
10. Press the [↓] key to choose Station Code.
11. Press the [Enter] key to open the station code entry window.
12. Enter the navtex station code (A-Z) of the navarea, in upper case alphabet.
For details about navtex stations, consult the operator's manual of the navtex
receiver.
13. Press the [Enter] key to close the station code entry window.
14. Choose message type to receive:
a) Press the [↓] or [↑] key to choose message type.
b) Press the [Enter] key.
c) Press the [↓] or [↑] key to choose ON or OFF as appropriate.
d) Repeat a) thru c) to set other message types.
e) Press the [Enter] key.
Note: Navtex messages "Coastal navigational information", "Meteorological
15. Press the [Esc] key to open the update window.
16. Yes is selected; press the [Enter] key to update EGC settings.
17. Press the [Esc] key to return to the standby display.
2-12
Setup
Receive EGC Area
Additional Position
Navarea
Fixed Area
Waypoint (from NAV Equipment)
NAVTEX
Station Code
Type of Message (Can't reject other report)
Ice reports
Meteo. forecasts
Pilot service
DECCA messages
LORAN messages
EGC setup menu, station code entry window
warning" and "Search and rescue alert" (they do not appear on the
EGC Setup menu) must always be received.
Setup
Receive EGC Area
Additional Position
Navarea
Fixed Area
Waypoint (from NAV Equipment)
NAVTEX
Station Code
Type of Message (Can't reject other report)
Ice reports
Meteo. forecasts
Pilot service
DECCA messages
LORAN messages
EGC setup menu, update window
EGC Setup
: :
OFF
OFF OMEGA messages
OFF SATNAV messages
OFF Other navaid msg
OFF QRU (no message)
OFF
EGC Setup
: :
OFF
OFF OMEGA messages
OFF SATNAV messages
OFF Other navaid msg
OFF QRU (no message)
OFF
OFF
OFF
OFF
OFF
OFF
Update OFF
OFF
Yes OFF No