Furuno FELCOM 16 Operator's Manual page 133

13. Choose DNID (Data Network ID) desired and press the [Enter] key. (LES ID
and Member No. are automatically selected according to DNID.)14. Press
the [↓] key to choose Activation.
14. Press the [Enter] key to open the activation options window.
15. Press the [↓] or [↑] key to choose "Regular Interval" or "Daily" as appropriate.
16. Press the [Enter] key to close the window.
17. Do one of the following depending on the selection you made at step 15.
"Regular Interval" selected at step 15
(1) Press the [↓] key to choose Interval Time.
(2) Press the [Enter] key to open the interval time entry window.
(3) Key in the interval time. The interval should be at least 10 minutes.
(4) Press the [Enter] key to close the window.
(5) Press the [↓] key to choose Report Times.
(6) Press the [Enter] key to open the report times entry window.
(7) Key in the report times, or press the [Back Space] key to display "---" to
choose "No Limit" to transmit data until the "Status" setting is turned OFF.
(8) Press the [Enter] key to close the window.
"Daily" selected at step 15
(1) Press the [↓] key to choose Start Time 1.
(2) Press the [Enter] key to open the start time entry window.
(3) Key in the start time, in 24-hour notation.
(4) Press the [Enter] key to close the window.
(5) If necessary enter start times for Start Time 2-4.
18. Press the [Esc] key to show the update window.
Data report menu (regular interval reporting)
19. Yes is selected; press the [Enter] key to register settings.
20. Press the [Esc] key to return to the standby display.
5. DATA REPORTING AND POLLING
Data Report
Data Report Programming
Status OFF
Report Length Position and Course/Speed
Destination
DNID
LES ID
Member No.
Activation Regular Interval
Interval Time 01:00
Report Times 24 (- - - : No Limit)
Start Time1 - - : - -
Start Time2 - - : - -
Start Time3 - - : - -
Start Time4 - - : - -
Update
Yes No
5-3