Furuno FELCOM 16 Operator's Manual page 38

2. SYSTEM INITIALIZATION
10. You may change the background and foreground colors for the various
display screens on the PC window as follows:
a) Choose Window Color Setup.
b) Window is selected; press the [→] or [←] key to choose the item to adjust.
BASE WINDOW:
RCV Message Display:
EGC Message Display:
EDIT1 – EDIT 2
Function:
Sub Menu1 – Sub Menu4: Sub menus
Message:
MENU
c) Press the [↓] key to choose Fore Color.
d) Press the [→] or [←] key to choose foreground color desired
e) Press the [↓] key to choose Back Color.
f) Press the [→] or [←] key to choose background color.
g) To change the color of other windows, repeat steps b-f.
h) Finally press the [Enter] key to show the Update window.
i) Yes is selected; press the [Enter] key.
Note: To restore all default color settings, choose Window Color from the
11. Press the [Esc] key three times to return to the standby display.
2-4
Window
Fore Color : L_WHITE
Back Color : BLUE
To Change: ENTER To Change Value: L<=>R
Window color setup menu
EDIT
File Edit Transmit EGC Reports Logs Options Setup Position StopAlarm
< [1] UNTITLED1 >
1:
2:
|
|
|
|
|
|
|
Location of items
Terminal Setup menu, choose Default Color and then press the [Enter]
key. Yes is selected; press the [Enter] key.
Window Color Setup
: Base Window
Standby display
Communications memory display
Communications display
Editor screens
Menu
Status message
BASE WINDOW
CAUTION
MESSAGE