Logout - Furuno FELCOM 16 Operator's Manual

2.3.2

Logout

1. Press the [F7] key to display the Options menu.
2. Press the [2] key to display the logout screen.
Note: The terminal unit must be "idle" to logout. When it is not idle, "Ignored:
3. Yes is selected; press the [Enter] key to start logout. The screen now looks
something like the illustration below.
4. When logout is completed, "Successful Logout." appears. "Current State"
then returns to IDLE.
5. Turn off the FELCOM 16.
MES is not idle." appears. Press the [Esc] key to return to the standby
display. Wait until the terminal unit becomes idle.
File Edit Transmit EGC
Options
Logout
Current State: IDLE
Successful Login.
DCE F16 Ver.**
Options menu, logout screen
File Edit Transmit EGC
Options
Logout
Starting Logout Process.
Press any key to escape.
Current State: LOGOUT
CALLING
DCE F16 Ver. **
Appearance of display screen during logout
Options
Reports Logs Setup Position StopAlarm
Start
Yes No
SYNC ( NCS )
NCS: IOR LOGIN
Options
Reports Logs Setup Position StopAlarm
SYNC ( NCS )
NCS: IOR LOGIN
2. SYSTEM INITIALIZATION
02-02-25 02:04 (UTC)
LAT: 34:30.00N
LON: 135:30.00E
02-02-25 02:02 (UTC)
LAT: 34:30.00N
LON: 135:30.00E
2-7