Warning Messages - Furuno FELCOM 16 Operator's Manual

7. MAINTENANCE, TROUBLESHOOTING
7.6.2

Warning messages

Messages in this category are prefixed with "WARNING:"
Error Message
BBER over 80%.
Scanning NCS start
manually.
Cannot enter new
DNID. Memory full for
DNIDs.
Cannot enter new
ENID. Memory full for
ENIDs.
Cannot find NCS CC in
all region. Scanning is
continued.
Cannot find NCS CC in
preferred region.
Scanning all region is
started.
Internal GPS UNIT
failure.
Synchronization loss.
Please change EGC
channel.
Synchronization loss.
Please check the
current NCS.
7-10
Warning messages
Meaning
BBER (Bulletin Board Error
Rate) exceeded 80%.
Memory for DNIDs is full.
Memory for ENIDs is full.
No NCS found in region.
NCS could not be found in
region selected. Scanning
started to find NCS.
GPS signal could not be
detected.
Your station is not
synchronized with selected
EGC channel.
Your station is not
synchronized with selected
NCS.
Action
Select NCS manually.
Delete unnecessary
DNIDs to enter new ones.
Delete unnecessary
ENIDs to enter new ones.
Scanning automatically
continues.
If NCS could not be
found, contact you dealer
for advice.
Internal GPS receiver
may be damaged if this
message appears
frequently. Contact your
dealer for advice.
Change EGC channel.
Change NCS.