Saving Receive Messages To A Floppy Disk; Automatically Saving Receive Messages - Furuno FELCOM 12 Operator's Manual

4-24

Saving receive messages to a floppy disk

1. Press [F6].
2. Press [2] to display the Receive Message Log.
Message No. LES
R0971106.001 Perth
R0971105.002 ABCDEFGHIJ
R0971105.001 Perth
R0971101.001 Perth
R0971024.001 Perth
Enter: Display S: Save
Figure 4-33 Sample delete message screen
3. Select a file. Press the [Enter] key to confirm contents of file.
After confirming contents, press the [Esc] key.
4. For confidential messages enter password. This password will also
be saved to the floppy disk.
5. Press the [S] key to save the file to the floppy disk.
Note: If a file by that name already exists on the floppy disk,
"A file by that name already exists on FD." appears.

Automatically saving receive messages

1. Press [F8].
2. Press [6] to display Auto Mode Setup menu.
Figure 4-34 Auto mode setup menu
3. Press [ ] to select "Auto Telex MSG Save".
4. Press [Enter] to open the selection window.
5. Select "ON".
6. Press [Enter] to close the selection window.
7. Press [Esc] twice.
Receive Message Log
Priority Size Addressee
Normal 32767
Normal 200 CAPTAIN
Distress 1234
Normal 3256 OFFICER
Normal 8251
Memory Available: 3317 Bytes
D: Delete
Setup
Auto Mode Setup
Auto Log Print
Receive Alarm
Auto Telex Msg Save
Auto EGC Msg Save
Data Report & Polling Print
7. E-Mail Setup
8. Directories
9. Configuration
Rec date & Time Status
97-11-06 16:10 Saved
97-11-05 17:30 Printed
97-11-05 14:15 Printed
97-11-01 3:45 Printed
97-10-24 13:20 Saved
OFF
ON
ON
OFF
ON