Adding Egc Channels - Furuno FELCOM 16 Operator's Manual

2.4.3

Adding EGC channels

The EGC Channel List stores EGC channels. There are currently four EGC
channels, one for each satellite. These four channels are pre-programmed into
the unit and marked in the EGC Channel List with asterisks. When more EGC
channels become available you can add them to the list as below.
1. Press the [F8] key to display the Setup menu.
2. Press the [8] key to display the Configuration menu.
3. Press the [3] key to display the EGC Channel List.
File
4. Using the arrow keys, place the cursor where there is no data entered.
Current EGC channels are marked with an asterisk. These channels cannot
be changed.
Edit Transmit EGC Reports
Setup
Configuration
EGC Channel List
ENTER: Set ESC: Quit
11080* 12580* 10840*
Logs Options
11088*
EGC channel list
2. SYSTEM INITIALIZATION
Setup Position StopAlarm
2-13