Other Functions; Aborting An Operation - Furuno FELCOM 16 Operator's Manual

6.

OTHER FUNCTIONS

This chapter describes how to abort operation, scan NCS, choose EGC and
NCS channels and display LES information.
6.1

Aborting an Operation

You can abort transmission, receiving or scanning (on the NCS common
channel) as follows:
1. Press the [F7] key to display the Options menu.
2. Press the [3] key to choose Abort.
3. Yes is selected; press the [Enter] key to abort current operation.
The message "FORCED CLEARING" replaces "SENDING" or "RECEIVING"
at the bottom of the screen. When the process has been aborted, the
message "Process Aborted. Press any key to escape." appears.
Note: If aborting is attempted in modes other than those mentioned above, the
message "Ignored: Can not abort current process." appears.
Options menu (when FELCOM 16 functions as Inmarsat MES)
Options
1. Login
2. Logout
3. Abort
4. Select NCS
5. Ocean Region
6. Test
Options
1. Login
2. Logout
3. Abort
4. Select NCS
5. Ocean Region
6. LES Information
7. Test
Abort
Yes
Abort screen
Start
No
6-1