Setting A Message Report - Furuno FELCOM 16 Operator's Manual

5. DATA REPORTING AND POLLING
5.1.2

Setting a message report

1. Press the [F5] key to display the Reports menu.
2. Press the [2] key to display the Message Report menu. Four addresses may
be registered.
3. Press [1], [2], [3] or [4] as appropriate
4. Press the [↓] key to choose Status.
5. Press the [Enter] key to open the status options window.
6. Press the [↓] or [↑] key to choose "ON" or "OFF" as appropriate.
ON:
OFF: Message report off
7. Press the [Enter] key to close the window.
8. Press the [↓] key to choose Station Name.
9. Press the [Enter] key to display the Station List.
5-4
Message report menu
PIN Code
Message Report Programming
Status
Station Name
Destination Type
Prefix Code
Country/Ocean Code
Station ID
Modem Type
Address
Subject
LES ID
Activation
Interval Time
Report Times
Start Time1
Start Time2
Start Time3
Start Time4
Report Contents
File
Message report menu
Message report on
Reports
1. Data Report
2. Message Report
3. Data Network ID
Reports menu
Message Report
1. Message Report 1
2. Message Report 2
3. Message Report 3
4. Message Report 4
Message Report
OFF
TELEX
Regular Interval
00:10
1 (- - - : No Limit)
- - : - -
- - : - -
- - : - -
- - : - -
NAV