Making Trap Settings - Fujitsu ServerView Event Manager User Manual

Making trap settings

4.10 Making trap settings
If you have selected Station for the forwarding, the New Station Configuration
window opens. In this window you can use the Station Settings and Time Model
Settings tabs to make all necessary settings for trap forwarding.
Station Settings tab
The Station Settings tab offers fields for the trap settings, some of which
already contain predefined settings.
The input fields in the Station Settings window have the following
meanings:
Name
Station Name Name of the station to which the traps are to be
Community
Time Model
IP Address
Table 15: Input fields in the Station Settings window
74
Meaning
forwarded.
If you want to modify the trap settings for an existing trap
forwarding (see Edit button,
alarms" on page 49), this field contains the already
assigned name and is disabled.
Name of the community to which the traps are to be
forwarded.
The default value is public.
Time model indicating when an alarm is to be
forwarded.
Select a predefined time model from the drop-down list.
You can set your own time model via the Time Model
Settings tab.
Internet protocol address
section "Forwarding
ServerView Event Manager