Fujitsu ServerView Event Manager User Manual page 55

In the input field Set time for repetition in seconds you can specify the interval after
which the same alarm is allowed through from the same server again. This is
useful to prevent the management station from being bombarded with identical
alarms from a server that is not running correctly.
When you specify, for example, an interval of 30 seconds, filter interval of each
severity are as follows:
Severity of
alarm
Critical
Major
Minor
Informational
Table 5: Filter interval of each severity
ServerView Event Manager
Value of Expression from which
severity filter interval is requested
1 30 seconds × 1
2 30 seconds × 2
3 30 seconds × 3
4 30 seconds × 4
Filter rules
Filter interval
30 seconds
60 seconds
90 seconds
120 seconds
55