Multipath Traps (Mp.mib) - Fujitsu ServerView Event Manager User Manual

5.3.10 MultiPath traps (mp.mib)

MIB-OID: 1.3.6.1.4.1.231.2.10.2
This section lists MultiPath traps in alphabetical order.
Trap name
sieMP
ActivePortChanged
sieMPAutoRecovered
sieMPError
sieMPErrorCleared
sieMPReconfigured
sieMPRetry
sieMPStatusChanged
Table 27: MultiPath traps
ServerView Event Manager
ID Meaning
1202 The user has enabled or
disabled a path of a
MultiPath group.
1205 A path of a MultiPath group,
which was in error status, is
accessible again due to
automatic recovery.
1200 A MultiPath group now
consists of only one path,
and an error has been
detected for this path. The
MultiPath group is not
operational anymore.
1206 A user has cleared the error
status for a path of a
MultiPath group.
1203 A path has been removed
from or added to a
MultiPath group.
1201 An error has been detected
on a path of a MultiPath
group. An attempt is being
made to execute the
command on another path
of the MultiPath group.
1204 A user has made a change
to a MultiPath group
(autorecovery was turned
on or off, loadbalancing was
turned on or off, or one path
was enabled or disabled.
Trap overview
Error class
informational
informational
critical
informational
informational
critical
informational
111