Alarm Rules - Fujitsu ServerView Event Manager User Manual

4.1

Alarm rules

An alarm rule forwards alarms from various servers to one or more destinations.
A complete definition of a new alarm rule consists of the following four steps:
– Defining the name of the new alarm rule (see
rules" on page
– Assigning one or more servers to the alarm rule (see
servers" on page
servers.
– Assigning one or more alarms to the alarm rule (see
alarms" on page
– Defining the response to the incoming alarms (see
alarms" on page
your own (e.g. Execute forwarding, Mail forwarding or Mobile forwarding).
When defining a new alarm rule, you will be guided step by step through the
individual screens for setting the alarm parameters. If you are changing an
existing alarm rule you can also call up the individual dialog screens directly via
the menu tree.
ServerView Event Manager
38).
41). The alarm rule then only applies to alarms from these
45).
49). Here you can use the standard destinations or define
Alarm rules
section "Managing alarm
section "Assigning
section "Assigning
section "Forwarding
37