Fujitsu ServerView Event Manager User Manual page 105

Trap name
FscDdmNameChanged
FscDdmPathFailed
FscDdmRetry
FscDdmActivePortChang
ed
FscDdmReconfigured
FscDdmStatusChanged
FscDdmAutoRecovered
FscDdmErrorCleared
FscDdmPnPRemove
FscDdmPnPNew
Table 23: DDM-Traps
ServerView Event Manager
ID Meaning
1414 After the driver has
changed the name of a
DuplexWrite group.
1415 After the driver has
detected an error on one
path of a MultiPath group.
1416 After the driver has
detected an error on one
path of a MultiPath group
and the retry of the
command was successful
on another path.
1417 After the driver has
changed the active path of a
MultiPath group.
1418 Change has been detected
detected in the MultiPath
configuration.
1419 After the driver has
changed the status of a
MultiPath path.
1420 After the driver has enabled
a path of a MultiPath group
(AutoRecovery).
1421 After the driver has cleared
the error status of a
MultiPath path.
1422 After the driver has
detected a Plug and Play
Removal.
1423 After the driver has
detected a Plug and Play
Add.
Trap overview
Error class
informational
critical
major
informational
informational
informational
informational
informational
informational
informational
105