Fujitsu ServerView Event Manager User Manual page 140

Trap overview
Trap name
sc2TrapMessageLogFul
l
sc2TrapMessageLogWa
rning
sc2TrapOnBattery
sc2TrapOnMains
sc2TrapPowerOffTimeR
eached
sc2TrapPowerSupplyAd
ded
sc2TrapPowerSupplyCri
tical
sc2TrapPowerSupplyFai
led
sc2TrapPowerSupplyOk 2032 Power supply is working
sc2TrapPowerSupplyRe
dundancyLost
sc2TrapPowerSupplyRe
moved
Table 41: ServerControl traps (SC2.mib)
140
ID Meaning
2100 The System Event Log
(message log) is full. No
more messages can be
logged. This trap will not
occur on wrap-around log
types.
2101 The warning threshold for
the number of System
Event Log entries has been
exceeded.
2042 The UPS is operating on
battery power or the power
supply is drawing current
from the backup battery unit
(BBU). This trap is
persistent and is resent at
one minute intervals until
the mains returns or the
system is switched off.
2043 The mains voltage returned
after a power failure.
2092 Power off time reached.
2030 One hot-replace power
supply was added.
2033 Power supply status
became critical.
2034 One hot-replace power
supply failed.
again.
2036 Power supply redundancy
id no longer available.
2031 One hot-replace power
supply was removed.
Error class
minor
minor
critical
informational
informational
informational
critical
major
informational
minor
informational
ServerView Event Manager