Fujitsu ServerView Event Manager User Manual page 91

Trap name
communication
Established
communicationLost
contactFault
contactFaultResolved
hardwareFailure
Bypass
lowBattery
powerRestored
restartAgent
returnFromBypass
returnFromLowBattery
smartAvrReducing
smartBoostOn
Table 19: APC traps
ServerView Event Manager
ID Meaning
8 Communication is established
between the agent and power
supply.
1 Communication between the
agent and power supply was
interrupted.
18 One of the contacts on the
Measure UPS has changed
from its default position.
19 An error on one of the
Measure UPS contacts has
been resolved.
20 The UPS is on bypass due to a
hardware failure.
7 The UPS system batteries are
low and will soon be
exhausted. If utility power is not
restored the UPS will put itself
to sleep and immediately cut
power to the load.
9 Utility power has been restored
after the occurrence of an
upsOnBattery condition.
29 The agent was restarted on the
command of the manager.
23 The UPS has returned from
bypass mode.
11 The UPS has returned from a
lowBattery condition.
31 The UPS has enabled
SmartAVR voltage reduction.
6 The UPS has enabled
SmartBoost.
Trap overview
Error class
informational
major
major
informational
major
major
informational
informational
informational
informational
minor
minor
91