Macros - Fujitsu ServerView Event Manager User Manual

Macros

4.11 Macros
Below is a list of macros that can be used for the forwarding of alarms (e.g. Mail,
Pager).
These macros are replaced by the corresponding information about the servers
which are reporting the alarm.
Name Meaning
$_SRV Name of the server
$_TRP Text of the alarm message
$_TYP Brief description of the alarm
$_IPA IP address of the server
$_CTY Community
$_SEV Severity of the alarm
(critical, major, minor, informational, unknown)
$_TIM Time model (format: yyyy-mm-dd-hh.mm.ss)
Local time schedule of the management station according to
which an alarm is forwarded.
$_IDN ID number of the server
$_OMS Name of management station
$_MIB MIB file name of the received alarm
$_SPC Specific number of the received alarm
$_MDL Fujitsu REMCS ID of a hardware which is reporting the alarm
Table 16: Macros
76
ServerView Event Manager