Fujitsu ServerView Event Manager User Manual page 92

Trap overview
Trap name
softwareBypass
switchedBypass
upsBatteryNeeds
Replacement
upsDiagnosticsFailed
upsDiagnosticsPassed 10
upsDipSwitchChanged 16
upsDischarged
upsOnBattery
upsOverload
upsRebootStarted
upsSleeping
upsTurnedOff
upsTurnedOn
upsWokeUp
Table 19: APC traps
92
ID Meaning
21 The UPS has been set to
bypass by a user via software
or via the UPS front panel.
22 The UPS has been set to
bypass by a user via the switch
on the back.
17 The UPS batteries require
immediate replacement.
3 Internal UPS self-test failed.
Internal UPS self-test passed.
The UPS DIP switch settings
have been changed.
4 The UPS batteries are
discharged. If utility power fails
an immediate low battery
condition will exist. Sufficient
runtime for necessary action
cannot be guaranteed.
5 The UPS is now providing
battery backup power.
2 The UPS has sensed a load
greater than 100% of its rated
capacity.
15 The UPS has started the
reboot sequence. The UPS will
reboot itself at this time.
13 The UPS is entering sleep
mode.
12 The UPS has been switched off
by a management station.
30 The UPS is turned on.
14 The UPS has woken up from
sleep mode. Power to the load
has been restored.
Error class
minor
minor
major
major
informational
minor
major
minor
major
minor
minor
minor
informational
informational
ServerView Event Manager