Fujitsu ServerView Event Manager User Manual page 42

Alarm rules
I
Because different server groups can have the same name, they are
displayed in the Alarm Configuration component with their group
hierarchy.
Figure 5: Alarm Rules - Assign Servers group hierarchy
You can use the following buttons to specify which servers are to belong to this
alarm rule:
>
Adds the selected servers to the alarm rule.
<
Removes the selected servers from the alarm rule.
>>
Adds all known servers to the alarm rule.
<<
Removes all servers from the alarm rule.
If you select Show Information about Server from the context menu, additional
information about the selected server is displayed. If you select Show unassigned
servers only, the server list will only contain the servers which are not yet
assigned to an alarm rule. If you select Show all Servers, all servers are shown
again.
Clicking the Apply button saves the new settings. Clicking the Reset button
restores the settings from the last save.
If the window is leaved without applying the changed configuration, or if a
necessary element for the alarm rule is missing, a corresponding warning
message will be issued.
42
ServerView Event Manager