Matrix Dfe Startup Screen Example (N7 Chassis) - Enterasys Platinum Distributed Forwarding Engine 7G4205-72 Hardware Installation Manual

The module is now ready to be configured. For information about setting the IP address
and configuring Telnet settings for remote access to DFE management, refer to Chapter 3
in the Enterasys Matrix DFE‐Platinum Series Configuration Guide. The CLI commands
enable you to initially set up and perform more involved management configurations.
The Enterasys Matrix DFE‐Platinum Series Configuration Guide is available online at:
http://www.enterasys.com/support/manuals
If you require assistance, contact Enterasys Networks using one of the methods described
in "Getting Help" on page xviii.
Figure 3-12

Matrix DFE Startup Screen Example (N7 Chassis)

login: admin
Password:
M A T R I X N7
Command Line Interface
Enterasys Networks, Inc.
50 Minuteman Rd.
Andover, MA 01810-1008 U.S.A.
Phone: +1 978 684 1000
E-mail: support@enterasys.com
WWW: http://www.enterasys.com
(c) Copyright Enterasys Networks, Inc. 2003
Chassis Serial Number:
Chassis Firmware Revision: xx.xx.xx
Matrix N7(su)->
xxxxxxxxxxxx
DFE-Platinum Series Hardware Installation Guide 3-25
Completing the Installation