Lanview Leds - Enterasys Platinum Distributed Forwarding Engine 7G4205-72 Hardware Installation Manual

Table 4-1 LANVIEW LEDs
LED Color
MGMT Off
Green
Amber
CPU Off
Amber
Green
Red
Green and
Amber
Amber and
off
State
Off. This DFE module is NOT
the Management Module.
Solid. This module is the
designated Management
Module.
Flashing. This is a
temporary indication that the
DFE module is saving data.
Power off.
Blinking. DFE module in
process of booting.
Solid. Testing.
Blinking. Image starts
running.
Solid. Functional.
Solid. Processor in reset.
Blinking. Indicates that the
DFE module is in the process
of shutting down.
Alternating (67% on, 33%
off). Indicates that a
shutdown process has
completed. This indication
will remain for 60 seconds
before automatically
restarting.
DFE-Platinum Series Hardware Installation Guide 4-5
Recommended Action
None.
None.
None.
Ensure chassis has adequate power.
None.
If the LED remains amber for several
minutes, contact Enterasys Networks
for technical support.
None.
None.
None.
None. This state is activated when the
OFFLINE/RESET switch is pressed for
less than 1 second to start the process
of an orderly shutdown.
While in this state, do not remove any
DFE module.
While in this state, you have 60
seconds to safely remove the DFE
module from the chassis.
Using LANVIEW